[Diy_efi] [ot] GM sites and trying to identify US models of thispart ?

[Mike]

Ah ha,

I'm not actually trying to get that part, I manufacture an upgrade version as
per my web link but the original one pictured has the letters "GM" on
the right hand side underlined (can just see it in that pic), so I doubt its another supplier.

My aim is to find what other models/years in USA used that part, locate the dealers
and offer the upgraded part. So far not much luck except the cadillac has
come up as a possible, so now I am looking for any cadillac specific forums or
dealers in USA that might be open to orderingd a superior part from Australia ?

Rgds

Mike



At 12:46 AM 3/23/07, you wrote:
>Isn't that just one of the front loaded TPAs used directly on a module connector? Wouldn't you be better off trying to source it from the tier level supplier? (Delphi, AMP, Tyco, Yazaki etc etc ) Does it have a small symbol cast into the plastic on it somewhere? I've never found the PN# cast into parts like that of much use at all. Last time I ordered a number cast into a plastic connector I got a frame rail for a Kodiak MD truck!
>WOT
>----- Original Message ----- From: "Mike Yates" <tmc_mike_yates at sbcglobal.net>
>To: <diy_efi at diy-efi.org>
>Sent: Thursday, March 22, 2007 8:34 AM
>Subject: Re: [Diy_efi] [ot] GM sites and trying to identify US models of thispart ?
>
>
>are you the guy selling the fuse kit's on ebay? for that part number?
>
>M
>
>
>On Thu, 22 Mar 2007 13:49:51 +0800, you wrote:
>
>>Hi chaps,
>>
>>As its so quiet, with only one post in a week, hope you guys dont mind
>>me asking a couple of questions re GM ?
>>
>>a.  Which web site forum would one consider to be the biggest GM
>>    related site in USA, have heard of http://gminsidenews.com but is there
>>    any older site closer to gm perhaps ?
>>
>>b.  Looking to identify which gm or opel model and years used this part
>>   in the usa, earlier part numbers but same looks were 92017433 & 92030036
>>   http://niche.iinet.net.au/Holden.JPG
>>
>>
>>
>>
>>Regards from
>>
>>
>>Mike Massen
>>Network Power Systems
>>Lab 08 9444 8961
>>Mb 0438 048961
>>Perth, Western Australia
>>* VL/VK & VN/VP/VR GMH Commodore Fuse Rail that wont warp or melt !
>>* RB30 Skyline/Nissan/VL Milspec ignition drivers with diagnostic features now in economy trials
>>* Twin tyres for most sedans, trikes and motorcycle sidecars
>>* Industrial grade PolyVinyliDeneChloride (PVDC Copolymer) in bulk, the best
>> oxygen and water protective barrier you can find for circuit boards.
>>* Special equipment on offer, 60KVA UPS with large battery cabinet - AUD$12K
>>Web site under construction   http://niche.iinet.net.au