[Diy_efi] GM CAMS tester

[don.broadus at exeloncorp.com]

Hello: Does anyone have info on GM's CAMS (Computerized Automotive
Maintenance  System) ?  I have a collection of cables and breakout boxes
that will be great for ECM projects. The cables allow you to plug into
the sensor and monitor it's function with out back probing. The breakout
boxes are for 727,730,747 type ECM's along with the older card edge
connector type. Figure 1988 date for this unit. A cable application list
would be a big help. Thanks  

 




-----------------------------------------
**************************************************
This e-mail and any of its attachments may contain Exelon
Corporation proprietary information, which is privileged,
confidential, or subject to copyright belonging to the Exelon
Corporation family of Companies. 
This e-mail is intended solely for the use of the individual or
entity to which it is addressed.  If you are not the intended
recipient of this e-mail, you are hereby notified that any
dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this e-mail is strictly
prohibited and may be unlawful.  If you have received this e-mail
in error, please notify the sender immediately and permanently
delete the original and any copy of this e-mail and any printout.
Thank You.
**************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20110218/05d2a6a9/attachment.html