[Diy_efi] [Diy-efi] Crimp connectors to join wires

[Dan]

Ben,
?
Element14 (or the old Farnell).
http://au.element14.com/te-connectivity/160631-3/crimp-splice/dp/1822119?in_merch=Products From TE Connectivity&MER=MER-BPR-4PPM-SP-TECO-CNN&
?
I think they are min $10 order (ex-GST) and then $10 shipping, or free if over $40 I think.
?
Just search for wire splice
?
Cheers

Dan
 

________________________________
 From: Ben P <benof1987 at hotmail.com>
To: "diy_efi at diy-efi.org" <diy_efi at diy-efi.org> 
Sent: Tuesday, October 30, 2012 10:38 PM
Subject: [Diy_efi] [Diy-efi] Crimp connectors to join wires
  

 
I need to find these crimp connectors in a batch smaller than 10,000, and preferably without the metal joining strip.

http://i01.i.aliimg.com/photo/v1/204163195/Length_5_3mm_Crimp_Terminal_lug_for.jpg

I find them extremely useful for adapting ecu plugs and wiring in stereos as even in large looms that have been completely severed (i.e. completely replacing a factory ecu with an aftermarket one without an adaptor loom, or dealing with a hacked engine loom from a wrecker) they add comparatively little to the bulk of wires.

Can someone tell me either where to get them (in Australia preferably) or at least what they are officially called? It's damn hard to order a part that none of the shops in Cairns even know exists...

Or if not, can someone recommend a crimp connector that ends up similarly compact? Normal spade or bullet connectors (and indeed anything with hard plastic insulation, I use heat shrink in tight spaces) need not apply.

Thanks
Ben
 
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20121031/e89c3704/attachment.html