[Efi332] S19 to C

[David Eicher]

Hi List,

 

Does anyone have the C source for a utility program to convert S19 files to
C header files? I need this utility to convert my Flash based executable to
an array of bytes (data) so my flash burn software can access it. I am
looking for a utility that will fill in the gaps in the S record file to
make a contiguous array.

 

Thanks,

 

Dave

 

 

  _____  

From: efi332-bounces at diy-efi.org [mailto:efi332-bounces at diy-efi.org] On
Behalf Of Paul Helmuth
Sent: Monday, June 13, 2005 9:48 PM
To: efi332 at diy-efi.org
Subject: Re: [Efi332] Question regarding PMMX

 

Jeff, Thanks.

 

I'll hunt through SourceForge and see what I can find.

 

-Paul

----- Original Message ----- 

From: bowtievette at aol.com 

To: efi332 at diy-efi.org 

Sent: Monday, June 13, 2005 7:57 AM

Subject: Re: [Efi332] Question regarding PMMX

 

Paul,

You may want to scrub through the SourceForge code as there are a number of
lessons learned embedded in there. And yes, the microcode in CVS on
SourceForge is modified from what you have. Since I needed those other
functions as well (SM for stepper motor IAC, rwtpin for discrete pin IO, and
ITC for a cam counter), another list member and I packaged up a new
combination of functions.  When you compile the "stock" 58XX tpu functions
with these into a custom mask, you will find that it won't fit the 332's
emulation RAM. Something had to go so the crank window function psp12d was
removed and pmmx8 and psp3 doctored to get them to work without psp12d.
Other than that, its the same microcode.

The 555 has more emulation ram available so even if you need these extra
functions, they should fit.

Jeff

 
-----Original Message-----
From: Paul Helmuth <PaulHelmuth at SprintMail.com>
To: efi332 at diy-efi.org
Sent: Sun, 12 Jun 2005 21:50:08 -0500
Subject: Re: [Efi332] Question regarding PMMX

Jeff,

 

Thanks for the additional info. Very useful, especially the part about
re-syncing.

 

It seems that those TPU notes describe a different emulation mask from the
one that I found in the archive. The code that I am working with was under 

ftp://ftp.diy-efi.org/pub/efi332/tpu/. The code under this directory must
have been an earlier snapshot as it doesn't contain the SM, ITC, and RWTPIN
referenced in the TPU Notes, and it does contain PSP3 (along with LPWM2, and
PTA). At least that is what it looks like if you reference the "main8.asc"
(TPUMASM build file).

 

Do you know if there is a set of code archived that matches the description
in the TPU Notes page (are you using something close to this)?

 

I looked through the "pub" stuff and didn't find it. I don't seem to have
access to "incoming" and don't see it in "uploads".

 

Thanks again,

-Paul

 

 

 


  _____  

size=2 width="100%" align=center> 

_______________________________________________
Efi332 mailing list
Efi332 at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/efi332

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/efi332/attachments/20050706/218562d2/attachment.html