749 inna 730

[Bruce Plecan]

-----Original Message-----
From: andy quaas <realsquash at yahoo.com>
To: gmecm at esl.eng.ohio-state.edu <gmecm at esl.eng.ohio-state.edu>
Date: Wednesday, March 31, 1999 7:52 PM
Subject: Re: 749 inna 730

No, the 730 uses one injector driver, and shares two pins for the injectors.

The 749 has two injector drivers and can be set as a single saturated
injector driver
like in the syclone, or as a dual Peak+Hold like in the Sunbird Turbo (that
used the 749),
or like in the Quad 4 (that used the 749).


It can take a ton of work to work out a calibration!.

If anyone thinks the reading the archives is time consuming you won't
beleive how much time you can invest inna calibration.
Bruce


>This is great info.  So you just plugged the 749 cal into the 730 (well
>after fuel table mods, i'm sure).  The 730 has 2 inj. drivers, correct?
>If so, you would just hook each one up in parallel to each bank, right?
>So one driver runs the left side and one runs the right....?
>Thanks
>Andy