hot fuel module

[Todd Israels]

>It seems to have no practical use, but one of the things the module
>does is keep the pump running after the key is off.  I can't see how
>this will prevent a real hot soak problem, as heat can be a problem
>for up to 1/2 hour after the engine's shut off.   But whatever the
>designers were after with extended pump operation doesn't seem to be
>possible with ecm alone.

	If the ECM is aC3 it may have requird a change to the program and not just
the table data in the calibrtor this may have been the reason the P4 has a
large eprom with the program on the caibrator.  
	It doesent sound like your applicaion needs this modual so it can be left off
			Todd Israels