749 in a 730 - troubles

[CSH-HQ]

Cut one up and put a ZIF on it.
Bruce


>
>>Sounds like the chip/CPU is totally out to lunch and you're running in
>>limp home mode.  Did you verify your programming of the EPROM?  And that
>>there are no bent pins and so on?
>
>Just got around to checking things out some.  It seems that I hosed up 
>something else in the memcal.  The chip has good data and I quadruple 
>checked the continuity on every pin.
>
>To verify my theory, I dumped the original 3.1 data on my setup and sure 
>enough, same problem.  Check engine - no code.
>
>I still have one bone-stock memcal, with which the car has no problem.  So 
>here's the dilema:  Do I dare tear into my last good memcal?  Hmmm...
>
>
>Jeremy
>
>
>_______________________________________________________________
>Get Free Email and Do More On The Web. Visit http://www.msn.com
>