Chomping at the bits....egr disable

[Carl Summers]

mailto:intech at writeme.com
Click on the above link to respond privatel
From:	Carl Summers [SMTP:intech at writeme.com]
Sent:	Friday, August 13, 1999 12:23 PM
To:	'gmecm at efi332.eng.ohio-state.edu'
Subject:	RE: Chomping at the bits....egr disable

Hi Shannen,
      For some reason my memory tells me that the temp enable is in F and 
the enable is actually inverted.....like 00=255 F and ff=0 F.....and I 
think I had problems when I set it to 00 so I ended up using 11(hex) which 
should be 234 F.....all I know is I tried it at FE and EGR still 
worked...thought I had the wrong address, tried inverting it and it 
worked...hth's
-Carl Summers
[Carl Summers]  er,,,,I mean the egr stopped working 
mailto:intech at writeme.com
Click on the above link to respond privately.

-----Original Message-----
From:	Shannen Durphey [SMTP:shannen at grolen.com]
Sent:	Thursday, August 12, 1999 11:10 PM
To:	gmecm at efi332.eng.ohio-state.edu
Subject:	Chomping at the bits

I'm working on a 747 bin, trying to disable egr.  Will any problems
result from setting the enable temp bit to 255?  Is that equal to 304
deg F?

Will setting this bit high effectively disable egr, or are there other
values that should be changed?

Shannen