95 vs 96 pcm

[Eric Clark]

Why would the 8051 be any different than previous ECM's.  In my 9278,
Roger and I found the VATS enable bit, and flipped it off.  Simple as
that.  Finding the right bit may be another matter all together.

-Eric

On Wed, 15 Dec 1999, Ken Kelly wrote:

> All factory 8051's seem to have VATS enabled. In some police
> models they had no Key pellet, and used a seperate module
> under the dash to generate the 50 Hz signal to the PCM. You
> must either use a 555 to generate a 50 Hz squarewave or
> disable VATS in the PCM.
> 
> 		Ken