bin files for Camaro

[Bruce Plecan]

-----Original Message-----
From: Mike Pilkenton <mpilkent at ptw.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Sunday, February 21, 1999 12:07 AM
Subject: Re: bin files for Camaro

BCC is Broadcast Code the ARPL is the BCC, are you asking for a bin file for
this
BCC?.
Is this ecm the one that came with the eng/trans you've got?.
Bruce


>Bruce, I'm not too clear on what you are asking?  The ecm is a 730 version
>and the numbers on the aluminum box are:
>
>    SERV. NO. 0122730        ARPL
>    866631 M220158316
>
>After taking the memcal cover off the number (bar code) on the circuit card
>is 973159101552055.  I assume this is just a serial number.  The
aftermarket
>memcal
>socket has a small circuit card with SMT components on it which takes up
>about half the socket.  The other half has what I assume is the original
>memcal which has a sticker on it:  DELCO ARPL 5180.  The aftermarket chip
is
>installed with a right angle socket adapter that plugs into the main board,
>houses the new chip, and retains the stock memcal/circuit card unit.  I
>don't have any specs on this chip but I will try to get them from the
>previous owner.  As far as auto versus manual tranny I guess I could wire
>the P/N switch but I'm not sure the box I have from the original car has
>that circuit installed since it came out of 5 speed.  What's a BCC?
>
>Mike
>
>
>-----Original Message-----
>From: Bruce Plecan <nacelp at bright.net>
>To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
>Date: Saturday, February 20, 1999 8:56 PM
>Subject: Re: bin files for Camaro
>
>
>>
>>-----Original Message-----
>>From: Mike Pilkenton <mpilkent at ptw.com>
>>To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
>>Date: Saturday, February 20, 1999 11:31 PM
>>Subject: bin files for Camaro
>>
>>What BCC code?.
>>What vin#.
>>Does it have to be 92 for sure?.
>>What ecm?.
>>Can't you run an auto with the P/N switch lead grounded?.
>>While I got a couple bins, I don't have the cross referencing gm does, so
I
>>can't
>>help without you or anyone else knowing what you want.
>>I mean I'm all for studing engine management, but ya gotta know exactly
>what
>>ya
>>want.
>>I hope that makes sense,
>>Bruce
>>
>>
>>>Does anyone have the bin file for the 92 Camaro 3.1L V6 5 speed tranny?
>>>
>>>Mike Pilkenton
>>>
>>>
>>>
>>
>