bin files for Camaro

[Shannen Durphey]

Hi, Bruce.  Sounds to me like he wants a different calibration for his
ecm.
The following calibration codes appear to be correct.
BAWX/6865
BMCD/9076 
Shannen

Bruce Plecan wrote:
> 
> -----Original Message-----
> From: Mike Pilkenton <mpilkent at ptw.com>
> To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
> Date: Sunday, February 21, 1999 12:07 AM
> Subject: Re: bin files for Camaro
> 
> BCC is Broadcast Code the ARPL is the BCC, are you asking for a bin file for
> this
> BCC?.
> Is this ecm the one that came with the eng/trans you've got?.
> Bruce
> 
> >Bruce, I'm not too clear on what you are asking?  The ecm is a 730 version
> >and the numbers on the aluminum box are:
> >
> >    SERV. NO. 0122730        ARPL
> >    866631 M220158316
> >
> >After taking the memcal cover off the number (bar code) on the circuit card
> >is 973159101552055.  I assume this is just a serial number.  The
> aftermarket
> >memcal
> >socket has a small circuit card with SMT components on it which takes up
> >about half the socket.  The other half has what I assume is the original
> >memcal which has a sticker on it:  DELCO ARPL 5180.  The aftermarket chip
> is
> >installed with a right angle socket adapter that plugs into the main board,
> >houses the new chip, and retains the stock memcal/circuit card unit.  I
> >don't have any specs on this chip but I will try to get them from the
> >previous owner.  As far as auto versus manual tranny I guess I could wire
> >the P/N switch but I'm not sure the box I have from the original car has
> >that circuit installed since it came out of 5 speed.  What's a BCC?
> >
> >Mike
> >
> >
> >-----Original Message-----
> >From: Bruce Plecan <nacelp at bright.net>
> >To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
> >Date: Saturday, February 20, 1999 8:56 PM
> >Subject: Re: bin files for Camaro
> >
> >
> >>
> >>-----Original Message-----
> >>From: Mike Pilkenton <mpilkent at ptw.com>
> >>To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
> >>Date: Saturday, February 20, 1999 11:31 PM
> >>Subject: bin files for Camaro
> >>
> >>What BCC code?.
> >>What vin#.
> >>Does it have to be 92 for sure?.
> >>What ecm?.
> >>Can't you run an auto with the P/N switch lead grounded?.
> >>While I got a couple bins, I don't have the cross referencing gm does, so
> I
> >>can't
> >>help without you or anyone else knowing what you want.
> >>I mean I'm all for studing engine management, but ya gotta know exactly
> >what
> >>ya
> >>want.
> >>I hope that makes sense,
> >>Bruce
> >>
> >>
> >>>Does anyone have the bin file for the 92 Camaro 3.1L V6 5 speed tranny?
> >>>
> >>>Mike Pilkenton
> >>>
> >>>
> >>>
> >>
> >