Fuel injection on the Dyno

[TK]

Short A and B of the ALDL connector. If the SES/CE lamp flashes, it's not
dead. You could start it and then short the pins and see if it's in O2
monitor mode.

Terry Kelley
-----Original Message-----
From: Nykyforuk <bnyk at oanet.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Saturday, July 03, 1999 4:02 PM
Subject: Fuel injection on the Dyno


>
>Hello everyone
>
>I'm in the process of hooking up my Sycone motor to go on the Dyno.
>I've powered up the ECM but can not get the diacom to link.
>I've used it before on this Ecm with no problems and tested it
>on another veicle to make sure it works. How else can I test the
>ECM to make sure its working? Any Ideas would be appreciatied!!!!
>
>Thanks
>
>Nolan
>
>
>