July 1999 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Jul 1 00:15:59 GMT 1999
Ending: Sat Jul 31 22:00:06 GMT 1999
Messages: 567

• 7747 ADTJ3382 uploaded to incomming   Steve Ciciora
• 7747 ADTJ3382 uploaded to incomming   Shannen Durphey
• 7747 ADTJ3382 uploaded to incomming   Shannen Durphey
• Cam Swap   ECMnut at aol.com
• 7747 ADTJ3382 uploaded to incomming   David A. Cooley
• 7747 ADTJ3382 uploaded to incomming   David A. Cooley
• 3d views   Wayne Blair
• 7730 addressing question   rr
• 7730 ARDC, AZTY, and other V6's   rr
• No subject   jsg at esl.eng.ohio-state.edu
• Other uses for the C.E Lamp   David Cooley
• Delco Chip ID in Excel.   Ross Myers
• Other uses for the C.E Lamp   CSH-HQ
• ECM Received!   Jason Haines
• dropped subscription, was Re: ECM Received!   jsg at donet.com
• Cam Swap   Rich Vandervoort
• PROM Bugs   Ludis Langens
• PROM relabeling?!   Ludis Langens
• Windoze Prom Editor   Eric Aos
• Trouble code info needed   Shannen Durphey
• Cam Swap   Gary Derian
• Windoze Prom Editor   W Johnson
• Odp: Trouble code info needed   Marek Skrzypiec
• Windoze Prom Editor   Your Name
• Windoze Prom Editor   Marc Piccioni
• Windoze Prom Editor   Dr.Acacio
• Windoze Prom Editor   Richard Wakeling
• Windoze Prom Editor   Programmer
• 1 ton truck 350 TBI application - no IAT   Marc Piccioni
• Trouble code info needed   Programmer
• Trouble code info needed   Shannen Durphey
• PROM Bugs   CSH-HQ
• 7730 ARDC, AZTY, and other V6's   rr
• Fuel injection on the Dyno   Nykyforuk
• Fuel injection on the Dyno   TK
• PROM Bugs   Ludis Langens
• PROM Bugs   Roger Heflin
• BIN File for 95 3.4 X engine   Ludis Langens
• Windoze Prom Editor   Eric Aos
• Windoze Prom Editor   Scott Feaver
• Windoze Prom Editor   Jon Fedock
• TBI systems   Ross Myers
• 16 PIN DLC PLUG   Richard Wakeling
• 16 PIN DLC PLUG   CSH-HQ
• TBI systems   Fran and Bud
• 7730 ARDC, AZTY, and other V6's   TK
• 7730 ARDC, AZTY, and other V6's   Mike Pilkenton
• 7730 ARDC, AZTY, and other V6's   TK
• Odp: Windoze Prom Editor   Marek Skrzypiec
• 7730 ARDC, AZTY, and other V6's   rr
• 7730 ARDC, AZTY, and other V6's   CSH-HQ
• Diacom problems...   Thomas Matthews
• Diacom problems...   CSH-HQ
• Diacom problems...   David A. Cooley
• GM EGR Disable   Programmer
• GM EGR Disable   CSH-HQ
• Windoze Prom Editor   Scott Flanagan
• 7730 ARDC, AZTY, and other V6's   Jeff M
• GM EGR Disable   TK
• EGR valve   dhardin at ovec.com
• Windoze Prom Editor   Pat Ford
• NV RAM update   jsg at donet.com
• Tuning 165 for SC - and ALUM Heads   Dave Zug
• GM EGR Disable   Programmer
• NV RAM update   CSH-HQ
• NV RAM update   Frederic Breitwieser
• '98 Vortec 350 - Good swap into a Jeep?   Simpson, James H
• Tuning 165 for SC - and ALUM Heads   CSH-HQ
• Tuning 165 for SC - and ALUM Heads   Don.F.Broadus at ucm.com
• Odp: Windoze Prom Editor   Todd Israels
• '98 Vortec 350 - Good swap into a Jeep?   Ward
• HELP, I erased the flash in my PCM   Ward
• Diacom problems...   David A. Cooley
• Diacom problems...   Knowlden and/or Eller
• NV RAM update   Marc Piccioni
• HELP, I erased the flash in my PCM   Marc Piccioni
• HELP, I erased the flash in my PCM   Programmer
• HELP, I erased the flash in my PCM   Beth Hempstead
• GM EGR Disable   Ward
• HELP, I erased the flash in my PCM   DAVE_HEMPSTEAD at HP-Andover-om3.om.hp.com
• '98 Vortec 350 - Good swap into a Jeep?   Simpson, James H
• '98 Vortec 350 - Good swap into a Jeep?   Squash
• Diacom problems...   Thomas Matthews
• HELP, I erased the flash in my PCM   Tom Hussey
• Tuning 165 for SC - and ALUM Heads   Dave Zug
• DRAC pinouts   Peter D. Hipson
• GM EGR Disable   Programmer
• '98 Vortec 350 - Good swap into a Jeep?   Simpson, James H
• '98 Vortec 350 - Good swap into a Jeep?   Squash
• '98 Vortec 350 - Good swap into a Jeep?   Squash
• '98 Vortec 350 - Good swap into a Jeep?   Shannen Durphey
• '98 Vortec 350 - Good swap into a Jeep?   Squash
• '98 Vortec 350 - Good swap into a Jeep?   Simpson, James H
• '98 Vortec 350 - Good swap into a Jeep?   Simpson, James H
• '98 Vortec 350 - Good swap into a Jeep?   Ken Kelly
• '98 Vortec 350 - Good swap into a Jeep?   Shannen Durphey
• '98 Vortec 350 - Good swap into a Jeep?   Ken Kelly
• '98 Vortec 350 - Good swap into a Jeep?   Simpson, James H
• Hummer Parts (sorry, off subject)   EFISYSTEMS at aol.com
• Hummer Parts (sorry, off subject)   David
• Hummer Parts (sorry, off subject)   EFISYSTEMS at aol.com
• Hummer Parts (sorry, off subject)   Peter D. Hipson
• Help for beginner   Bancherd(Mike) DeLong
• Hummer Parts (sorry, off subject)   Todd....!!
• Hummer Parts (sorry, off subject)   Todd....!!
• '98 Vortec 350 - Good swap into a Jeep?   CSH-HQ
• '98 Vortec 350 - Good swap into a Jeep?   CSH-HQ
• '98 Vortec 350 - Good swap into a Jeep?   Shannen Durphey
• '98 Vortec 350 - Good swap into a Jeep?   Shannen Durphey
• Help for beginner   CSH-HQ
• Tuning 165 for SC - and ALUM Heads   CSH-HQ
• '98 Vortec 350 - Good swap into a Jeep?   CSH-HQ
• Tuning 165 for SC - and ALUM Heads   Knowlden and/or Eller
• Help for beginner   Knowlden and/or Eller
• Diacom problems...   Knowlden and/or Eller
• '98 Vortec 350 - Good swap into a Jeep?   Shannen Durphey
• VSS sending unit?   Mike Pilkenton
• VSS sending unit?   steve ravet
• '98 Vortec 350 - Good swap into a Jeep???   Peter Fenske
• '98 Vortec 350 - Good swap into a Jeep???   Frederic Breitwieser
• VSS sending unit?   Stuart Bunning
• Assembler Guru's.   Ross Myers
• VSS sending unit?   Gary Derian
• '98 Vortec 350 - Good swap into a Jeep???   Clive Apps Techno-Logicals 416 510 0020
• '98 Vortec 350 - Good swap into a Jeep?   Ward
• '98 Vortec 350 - Good swap into a Jeep?   Squash
• M6811DIS Disassembler   Donald Whisnant
• FW: Programmers Heaven - Assembler Zone - Motorola 68HC11 - AS11.ZIP Download page   Marc Piccioni
• Assembler Guru's.   Ludis Langens
• M6811DIS Disassembler   jsg at donet.com
• Assembler Guru's.   Ward
• Forgotten WIN Utility (was Re: M6811...)   Dave Zug
• Forgotten WIN Utility (was Re: M6811...)   jgwynne at mrcday.com
• M6811DIS Disassembler   Knowlden and/or Eller
• M6811DIS Disassembler   Steve Ciciora
• 3800 series II swap, please read :)   Kevin
• 3800 series II swap, please read :)   David A. Cooley
• Assembler Guru's.   Peter Fenske
• 3800 series II swap, please read :)   Peter Fenske
• 3800 series II swap, please read :)   Kevin
• 3800 series II swap, please read :)   David A. Cooley
• 3800 series II swap, please read :)   David A. Cooley
• 3800 series II swap, please read :)   Shannen Durphey
• 3800 series II swap, please read :)   Kevin Margitta
• 3800 series II swap, please read :)   Frederic Breitwieser
• Assembler Guru's.   Ross Myers
• 3800 series II swap, please read :)   Shannen Durphey
• 3800 series II swap, please read :)   Ludis Langens
• 3800 series II swap, please read :)   TK
• 3800 series II swap, please read :)   David A. Cooley
• 3800 series II swap, please read :)   CSH-HQ
• 3800 series II swap, please read :)   TK
• halp, need a VIN for a 7730 V8 ASAP   ECMnut at aol.com
• M6811DIS Disassembler   TK
• M6811DIS Disassembler   Donald Whisnant
• Halp ANHT cal   Peter Fenske
• Halp: Turbo V6   Peter Fenske
• Halp: Turbo V6   CSH-HQ
• Halp: Turbo V6 OTHER REPLY   CSH-HQ
• 3800 series II swap, please read :)   Shannen Durphey
• 3800 series II swap, please read :)   TK
• Halp ANHT cal   Shannen Durphey
• 3800 series II swap, please read :)   Shannen Durphey
• halp, need a VIN for a 7730 V8 ASAP   Shannen Durphey
• halp, need a VIN for a 7730 V8 ASAP   Vance Rose
• Halp ANHT cal   Peter Fenske
• Halp ANHT cal   Peter Fenske
• Halp ANHT cal   thergen at svn.net
• Halp ANHT cal   thergen at svn.net
• Halp ANHT cal   Peter Fenske
• Halp ANHT cal   Shannen Durphey
• 3800 series II swap, please read :)   Nick Dole
• 3800 series II swap, please read :)   Nick Dole
• Halp ANHT cal   Jason Weir
• Halp ANHT cal   David A. Cooley
• Halp ANHT cal   Peter Fenske
• Halp ANHT cal   Peter Fenske
• GMECM Digest V1 #184   Donald Whisnant
• Halp ANHT cal   Ward
• Halp ANHT cal   Peter Fenske
• Halp ANHT cal   CSH-HQ
• Halp ANHT cal   thergen at svn.net
• Halp ANHT cal   Shannen Durphey
• halp, need a VIN for a 7730 V8 ASAP   EFISYSTEMS at aol.com
• Halp ANHT cal   EFISYSTEMS at aol.com
• 3800 series II swap, please read :)   Ludis Langens
• Halp ANHT cal   EFISYSTEMS at aol.com
• 3800 series II swap, please read :)   Kevin Margitta
• 3800 series II swap, please read :)   TK
• Halp ANHT cal   thergen at svn.net
• Halp ANHT. cal   Peter Fenske
• Halp ANHT cal   Peter Fenske
• PROM Bugs   Ludis Langens
• 3800 series II swap, please read :)   Ludis Langens
• 3800 series II swap, please read :)   TK
• M6811DIS Disassembler   jgwynne at mrcday.com
• 749 or 730 as aux fueler   Carl Summers
• Hard to start 747   CSH-HQ
• 749 or 730 as aux fueler   ECMnut at aol.com
• 749 or 730 as aux fueler   thergen at svn.net
• 749 or 730 as aux fueler   CSH-HQ
• Hard to start 747   Jason Weir
• KalMaker   Richard Wakeling
• Halp ANHT cal   Peter Fenske
• Hard to start 747   Ward
• M6811DIS Disassembler   Tom Sharpe
• KalMaker   Ross Myers
• PROM Bugs   Bancherd(Mike) DeLong
• KalMaker   Richard Wakeling
• KalMaker   Nick Dole
• PROM Bugs   Ludis Langens
• KalMaker   Steve Lamb
• M6811DIS Disassembler   jgwynne at mrcday.com
• 749 or 730 as aux fueler   jsg at donet.com
• M6811DIS Disassembler   Donald Whisnant
• 749 or 730 as aux fueler   Carl Summers
• 749 or 730 as aux fueler   Shannen Durphey
• 749 or 730 as aux fueler   Frederic Breitwieser
• Injector Pulse Width.   Richard Wakeling
• 3800 series II swap, please read :)   Ludis Langens
• 3800 series II swap, please read :)   TK
• 7730 addresses   Pat Ford
• 7730 addresses   David Cooley
• 7730 addresses   EFISYSTEMS at aol.com
• P4 ALDL information request   Kevin Day
• 7730 addresses   Ludis Langens
• Eprom Burner sources +   Shannen Durphey
• Modula ?   Wayne Blair
• P4 ALDL information request   Ward
• 7730 addresses   Ward
• P4 ALDL information request   TK
• P4 ALDL information request   Ken Kelly
• P4 ALDL information request   Marc Randolph
• P4 ALDL information request   Ludis Langens
• Modula ?   Donald Whisnant
• P4 ALDL information request   Eric Clark
• 7730 addresses   Pat Ford
• New EGT!   Patrick G. Moore
• tracker dead motor, whats a good gm2.8   Pat Ford
• P4 ALDL information request   Roger Heflin
• P4 ALDL information request   David Cooley
• tracker dead motor, whats a good gm2.8   Marcus Gilbert
• M6811DIS Disassembler   Ludis Langens
• 3800 series II swap, please read :)   Kevin Margitta
• 3800 series II swap, please read :)   Squash
• 3800 series II swap, please read :)   Kevin Margitta
• Motronic ECU's   Alan Smith
• 3800 series II swap, please read :)   David A. Cooley
• 3800 series II swap, please read :)   Kevin Margitta
• 3800 series II swap, please read :)   David A. Cooley
• 3800 series II swap, please read :)   Kevin Margitta
• 3800 series II swap, please read :)   Shannen Durphey
• 3800 series II swap, please read :)   Kevin Margitta
• 3800 series II swap, please read :)   Todd Israels
• 3800 series II swap, please read :)   CSH-HQ
• 3800 series II swap, please read :)   Shannen Durphey
• M6811DIS Disassembler   Tom Sharpe
• EFI332 questions - d/l   Marc Piccioni
• Motronic ECU's   Ross Myers
• Motronic ECU's   Ross Myers
• P4 and the 16045148   Pat Ford
• P4 and the 16045148   David Cooley
• P4 and the 16045148   Pat Ford
• P4 and the 16045148   David Cooley
• M6811DIS Disassembler   Donald Whisnant
• 3800 series II swap, please read :)   Programmer
• P4 and the 16045148   Ludis Langens
• M6811DIS Disassembler   Ludis Langens
• AS6811 Assembler is now online!!   Donald Whisnant
• Motronic ECU's   Alan Smith
• P4 and the 16045148   Ross Myers
• M6811DIS Disassembler   jgwynne at mrcday.com
• AS6811 Assembler is now online!!   jgwynne at mrcday.com
• auto commenter   jsg at donet.com
• auto commenter   TK
• 7730 Design.   Ross Myers
• Forgotten WIN Utility (was Re: M6811...)   Dave Zug
• AS6811 Assembler is now online!!   Donald Whisnant
• speed signal and DRAC   Kevin
• speed signal and DRAC   TK
• auto commenter   Knowlden and/or Eller
• auto commenter   jgwynne at mrcday.com
• a MAF too small   Dave Zug
• a MAF too small   Patrick G. Moore
• a MAF too small   jgwynne at mrcday.com
• a MAF too small   Frederic Breitwieser
• a MAF too small   EFISYSTEMS at aol.com
• a MAF too small   CSH-HQ
• a MAF too small   CSH-HQ
• a MAF too small   CSH-HQ
• a MAF too small   CSH-HQ
• Update from CSH, HQ, none gemc   CSH-HQ
• a MAF too small   Mark Romans
• a MAF too small   Peter Fenske
• Update from CSH, HQ, none gemc   Ross Myers
• a MAF too small   Dave Zug
• a MAF too small   Dave Zug
• a MAF too small   Dave Zug
• a MAF too small   Dave Zug
• a MAF too small   Dave Zug
• a MAF too small   Dave Zug
• a MAF too small   Dave Zug
• a MAF too small   Ludis Langens
• a MAF too small   Dave Zug
• a MAF too small (!)   Dave Zug
• a MAF too small (!)   Dave Zug
• a MAF too small   Frederic Breitwieser
• a MAF too small   Frederic Breitwieser
• a MAF too small   Frederic Breitwieser
• a MAF too small   Frederic Breitwieser
• a MAF too small   Frederic Breitwieser
• Update from CSH, HQ, none gemc   Stuart Bunning
• a MAF too small (!)   Daniel Ciobota
• I'm new to EFI and need some help.   SprintC41 at aol.com
• a MAF too small   Dave Zug
• Update from CSH, HQ, none gemc   Dave Zug
• I'm new to EFI and need some help.   David Cooley
• a MAF too small (!)   Frederic Breitwieser
• a MAF too small (!)   Frederic Breitwieser
• I'm new to EFI and need some help.   Frederic Breitwieser
• a MAF too small   Ludis Langens
• 2.8 Fiero Turbo Project   James P Hunt
• 2.8 Fiero Turbo Project   David A. Cooley
• 2.8 Fiero Turbo Project   Neil Emiro
• 2.8 Fiero Turbo Project   James P Hunt
• 2.8 Fiero Turbo Project   James P Hunt
• I'm new to EFI and need some help. & hey you forgot your name   EFISYSTEMS at aol.com
• da*ta lo*gger   Carl Summers
• Da*ta Lo$gger again   Carl Summers
• da*ta lo*gger   CSH-HQ
• I'm new to EFI and need some help. & hey you forgot your name   CSH-HQ
• 2.8 Fiero Turbo Project   CSH-HQ
• 747 swap - TCC control using kick down output from ECM   Marc Piccioni
• da*ta lo*gger   Carl Summers
• 747 swap - TCC control using kick down output from ECM   Marc Piccioni
• I'm new to EFI and need some help. & hey you forgot your name   Ohh2fst4u at aol.com
• a MAF too small   Dave Zug
• 2.8 Fiero Turbo Project   jgwynne at mrcday.com
• a MAF too small (!)   Dave Zug
• a MAF too small   Dave Zug
• a MAF too small   Jason Haines
• MAF-CALC XL sheet   Dave Zug
• 2.8 Fiero Turbo Project   Ludis Langens
• da*ta lo*gger   Ward
• a MAF too small   Dave Zug
• 2.8 Fiero Turbo Project   Dave Zug
• switching O2 sensor specifications   Jason Haines
• da*ta lo*gger   CSH-HQ
• a MAF too small   Dave Zug
• a MAF too small   CSH-HQ
• 2.8 Fiero Turbo Project   CSH-HQ
• a MAF too small (!)   Frederic Breitwieser
• a MAF too small   Frederic Breitwieser
• Da*ta Lo$gger again   Knowlden and/or Eller
• a MAF too small (!)   Pat Ford
• 2.8 Fiero Turbo Project   Dave Zug
• 2.8 Fiero Turbo Project   James P Hunt
• 2.8 Fiero Turbo Project   David Cooley
• 2.8 Fiero Turbo Project   Gregory A. Parmer
• a MAF too small   Daniel Ciobota
• switching O2 sensor specifications   CSH-HQ
• a MAF too small   CSH-HQ
• a MAF too small (!)   Todd....!!
• a MAF too small   Daniel Ciobota
• 2.8 Fiero Turbo Project   Ludis Langens
• 3800 series II swap, please read :)   Ludis Langens
• MAF-CALC XL sheet   Todd....!!
• 2.8 Fiero Turbo Project   TK
• 2.8 Fiero Turbo Project   Shannen Durphey
• a MAF too small   CSH-HQ
• 2.8 Fiero Turbo Project   CSH-HQ
• 2.8 Fiero Turbo Project   TK
• 2.8 Fiero Turbo Project   TK
• 2.8 Fiero Turbo Project   ECMnut at aol.com
• 2.8 Fiero Turbo Project   thergen at svn.net
• 2.8 Fiero Turbo Project   CSH-HQ
• 2.8 Fiero Turbo Project   TK
• 2.8 Fiero Turbo Project   TK
• 2.8 Fiero Turbo Project   TK
• a MAF too small   Jason Haines
• a MAF too small   Jason Haines
• a MAF too small   Frederic Breitwieser
• 2.8 Fiero Turbo Project   Knowlden and/or Eller
• a MAF too small   Knowlden and/or Eller
• 2.8 Fiero Turbo Project   CSH-HQ
• 2.8 Fiero Turbo Project   Ludis Langens
• What to DO?   David C. Allen
• What to DO?   TK
• a MAF too small   CSH-HQ
• a MAF too small   CSH-HQ
• a MAF too small   CSH-HQ
• What to DO?   Frederic Breitwieser
• 747 timing   CSH-HQ
• 2.8 Fiero Turbo Project   jgwynne at mrcday.com
• What to DO?   TK
• 2.8 Fiero Turbo Project   TK
• What to DO?   David C. Allen
• What to DO?   TK
• baro... wasRe: a MAF too small   jgwynne at mrcday.com
• 2.8 Fiero Turbo Project   jgwynne at mrcday.com
• Big (file) screw up   Knowlden and/or Eller
• 2.8 Fiero Turbo Project   TK
• What to DO?   CSH-HQ
• Baro calculation   CSH-HQ
• 2.8 Fiero Turbo Project   ECMnut at aol.com
• What to DO?   Joe Boucher
• 2.8 Fiero Turbo Project   James P Hunt
• a MAF too small   Jason Haines
• What to DO?   Squash
• Can you name this tune?   Marc Randolph
• 3800 series II swap in Lesabre T-type   Kevin
• 3800 series II swap in Lesabre T-type   TK
• 3800 series II swap in Lesabre T-type   Eric Aos
• 3800 series II swap in Lesabre T-type   TK
• 3800 series II swap in Lesabre T-type   Bartz, Jamison
• Anyone have a bin for a 99 3800 Series II ?   Eric Aos
• 3800 series II swap in Lesabre T-type   TK
• No subject   Alan Smith
• Eprom Map Analysis Database   Alan Smith
• Can you name this tune?   Mark Romans
• a MAF too small   Mark Romans
• Can you name this tune?   Steve Ciciora
• 3800 series II swap in Lesabre T-type~440T4/4T60/4T60E   Jeff M
• 2.8 Fiero Turbo Project   Ludis Langens
• 4T-65E   Kevin
• 4T-65E   Jeff M
• 162444210 PCM Question   Dickie Venables
• Can you name this tune?   Teller.John at orbital.com
• 4T-65E   Kevin
• 4T-65E   Scott Feaver
• a MAF too small   Jason Haines
• a MAF too small   TK
• What to DO?   Vance Rose
• Can you name this tune?   Shannen Durphey
• Can you name this tune?   thergen at svn.net
• 747 timing   rr
• Can you name this tune?   Mark Romans
• 4T-65E   Jeff M
• 4T-65E   TK
• MAF-CALC XL sheet   Dave Zug
• a MAF too small   Dave Zug
• a MAF too small   CSH-HQ
• Ignition Modules   JTesta1966 at aol.com
• Can you name this tune?   W Johnson
• Ignition Modules   Frederic Breitwieser
• Can you name this tune?   Teller.John at orbital.com
• Ignition Modules   JTesta1966 at aol.com
• What to DO?   Squash
• Ignition Modules   Frederic Breitwieser
• What to DO?   Frederic Breitwieser
• Timing Retard w/o knock & MAF oscillations   Richard Wakeling
• Ignition Modules   JTesta1966 at aol.com
• Ignition Modules   Frederic Breitwieser
• 2.8 Fiero Turbo Project   James P Hunt
• What to DO?   Squash
• What to DO?   Frederic Breitwieser
• 4T-65E   Jeff M
• Windoze Prom Editor   Enrique Martin
• Ignition Modules   CSH-HQ
• 4T-65E   TK
• 4T-65E   Kevin
• 2.8 Fiero Turbo Project   Ludis Langens
• 4T-65E   Kevin
• MAF-CALC XL sheet   Frederic Breitwieser
• 4T-65E   Kevin
• 747 timing   CSH-HQ
• 4T-65E   Peter D. Hipson
• Ignition Modules   Mark Douwe
• MAF too small   CSH-HQ
• Can you name this tune?   Jon Fedock
• 4T-65E   Jeff M
• What to DO?   Gregory A. Parmer
• Can you name this tune?   Programmer
• What to DO?   Programmer
• What to DO?   Vance Rose
• Can you name this tune?   Mark Romans
• What to DO?   TK
• 350 roadmaster ecm / 7747 ecm   Brent Obermiller
• Table of GM PCM's (1990 and up)????   Dave Hempstead
• Ignition Modules   JTesta1966 at aol.com
• Ignition Modules   Frederic Breitwieser
• Ignition Modules   Matt S Bower
• Ignition Modules   JTesta1966 at aol.com
• Odp: 350 roadmaster ecm / 7747 ecm   Marek Skrzypiec
• 350 roadmaster ecm / 7747 ecm   Carl Summers
• 350 roadmaster ecm / 7747 ecm   Carl Summers
• 350 roadmaster ecm / 7747 ecm   CSH-HQ
• 2.8 Fiero Turbo Project   steve ravet
• What to DO?   steve ravet
• What to DO?   Squash
• Has anyone used this epron emulator?   ECMnut at aol.com
• 350 roadmaster ecm / 7747 ecm   Shannen Durphey
• Has anyone used this epron emulator? LDTI   TK
• Can you name this tune?   Jon Fedock
• Has anyone used this epron emulator? LDTI   TK
• 350 roadmaster ecm / 7747 ecm   Brent Obermiller
• What to DO?   Brent Obermiller
• a MAF too small   Ross Myers
• Can you name this tune?   Ross Myers
• bosch motronic   TT
• g/s to cfm   Dave Zug
• What to DO?   Squash
• 350 roadmaster ecm / 7747 ecm   Squash
• g/s to cfm   Clive Apps Techno-Logicals 416 510 0020
• 7427 ECM!!!!   Jeffrey Scott
• g/s to cfm   Dave Zug
• bosch motronic   Gary Derian
• 7427 ECM!!!!   CSH-HQ
• 7427 ECM!!!!   CSH-HQ
• TBI for Buick V6 ODD-FIRE   Steve Redinger
• g/s to cfm   CSH-HQ
• TBI for Buick V6 ODD-FIRE   CSH-HQ
• TBI for Buick V6 ODD-FIRE   Frederic Breitwieser
• TBI for Buick V6 ODD-FIRE   CSH-HQ
• g/s to cfm   CSH-HQ
• TBI for Buick V6 ODD-FIRE   Gregory A. Parmer
• 350 roadmaster ecm / 7747 ecm   Shannen Durphey
• What to DO?   Marc Piccioni
• g/s to cfm   Todd....!!
• TBI for Buick V6 ODD-FIRE   Gary Derian
• TBI for Buick V6 ODD-FIRE   Frederic Breitwieser
• TBI for Buick V6 ODD-FIRE   CSH-HQ
• hot fuel module   Marc Piccioni
• Need some PROM-tweaking halp...   Ron Gregory
• hot fuel module   Dennis Bell
• hot fuel module   Marc Piccioni
• 7427 ECM!!!!   Ludis Langens
• Chip for 85 305 TPI on carb 350   Ludis Langens
• hot fuel module   Shannen Durphey
• Need some PROM-tweaking halp...   Shannen Durphey
• TBI for Buick V6 ODD-FIRE   Gary Derian
• Chip for 85 305 TPI on carb 350   Michael Davis
• g/s to cfm   Dave Zug
• diacomm   Rod L Davis
• hot fuel module   Ward
• hot fuel module   Ward
• Spark Tuning   Dave Zug
• hot fuel module   Marc Piccioni
• TBI for Buick V6 ODD-FIRE   CSH-HQ
• Need some PROM-tweaking halp...   CSH-HQ
• Chip for 85 305 TPI on carb 350   CSH-HQ
• g/s to cfm   CSH-HQ
• Spark Tuning   CSH-HQ
• g/s to cfm   Greg Hermann
• hot fuel module   Shannen Durphey
• Need some PROM-tweaking halp...   rr
• g/s to cfm   CSH-HQ
• VSS sending unit   Mike Pilkenton
• valve unshrouding + porting and polishing intake/exhaust ports   Rod L Davis
• g/s to cfm   Greg Hermann
• What are most of you use to get prom programmed data   Rod L Davis
• diacomm   Alan Smith
• diacomm   Frank F Parker
• g/s to cfm   CSH-HQ
• valve unshrouding + porting and polishing intake/exhaust ports   Abdullah AL-Kandery
• Chip for 85 305 TPI on carb 350   CSH-HQ
• 7427 ECM!!!!   Ross Myers
• Used PCM Prices.   Ross Myers
• Chip for 85 305 TPI on carb 350   ECMnut at aol.com
• diacomm   b1lly at concept2000.net.au
• Odp: Ignition Modules   Marek Skrzypiec
• Need some PROM-tweaking halp...   Knowlden and/or Eller
• Chip for 85 305 TPI on carb 350   Knowlden and/or Eller
• valve unshrouding + porting and polishing intake/exhaust ports   Knowlden and/or Eller
• valve unshrouding + porting and polishing intake/exhaust ports   CSH-HQ
• valve unshrouding + porting and polishing intake/exhaust ports   Mark Romans
• Spark Tuning   Mark Romans

Last message date: Sat Jul 31 22:00:06 GMT 1999
Archived on: Thu May 30 05:42:53 GMT 2013

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...