Can you name this tune?

[Mark Romans]

I'm not an electronics type, well maybe a wee bit, but the prom ran great
with pin 28 cut!  No two reads were the same with it cut.  Soldered it back
and it read perfect!
Want a copy of an 87 Vet automatic TPIS Level 2 chip?
Mark
-----Original Message-----
From: Shannen Durphey <shannen at grolen.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Monday, July 26, 1999 6:37 PM
Subject: Re: Can you name this tune?


>Teller.John at orbital.com wrote:
>>
>> Pin 28 on an EPROM is usually VCC (+5V).  The part will not function
properly
>> without it! Are you sure the pin didn't get broken off somehow?
>>
>> --- John T.
>>
>> >TPIS puts happy faces on their proms and paints them gold.  I bought a
TPIS
>> >level 2 chip.  Word of caution.  Unless it's an early chip, the glue the
lid
>> >on with silicone and cut pin 28 so you can't read the chip.
>> >I read it anyway.  I WIN!
>> >Mark
>
>Yup, they glued the lid on, and cut two pins.  First I wasted a bunch
>of time verifying that I couldn't read the bin.  The I decided that
>the glued cover was there to prevent me from looking underneath, so I
>looked underneath. ; )  First find was a cut pin.  A small jumper made
>from a safety pin allowed reads, but no two reads were alike.  More
>time spent cleaning the cut pin and the jumper, then went back to
>digging away the rest of the silicone and voila! a second cut pin.
>After fashioning another jumper, I got a good repeatable read.  I
>removed the jumpers, put eyebrows on the happy face, glued the cover
>on and sent the car on it's way.
>I won too.  The prom _did_ work with these two pins cut, whichever
>ones they were.
>Shannen
>