3800 series II swap, please read :)

[TK]

Are you saying it's a hardware mask and not software?


-----Original Message-----
From: Ludis Langens <ludis at cruzers.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>; Kevin
<speakerconnection at home.com>
Date: Wednesday, July 14, 1999 3:28 AM
Subject: Re: 3800 series II swap, please read :)


>TK wrote:
>>
>> No, the 92 3800 doesn't have this. There is a byte that specifies the IP
>> divisor and a Road Speed Constant. Nothing like what you are describing.
>
>Does the 92 ECM have either/both of the chips I mentioned?  (45154 &
>64992)  I assume the 88 setup used the 1228253 V6 SFI ECM with the
>orange 3rd plug?  If the newer ECM has the 64992, then it almost has to
>have the extra divisor capability.  With some ohmmeter work, we should
>be able to figure out how to access that feature.
>
>--
>Ludis Langens                               ludis (at) cruzers (dot) com
>Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/
>
>