GM EGR Disable

[Programmer]

Bruce,

Good to see you "up and around"--That'd be great if I could find the
"address" for this <g>. The Prom is a BJYL from a newer truck on a 512K
chip.

Lyndon...

-----Original Message-----
From: CSH-HQ <nacelp at jvlnet.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Monday, July 05, 1999 9:24 PM
Subject: Re: GM EGR Disable


>For Off-Road use, mechanically block the valve, and then set the enable
temp
>very high.  Then disable the malfunction flag.
>Bruce
>
>>Hi guys,
>>
>>Been lurking and basically can't find this info in the archives--or it's
>>there and I can't find it. There are many ways to disable EGR--either fill
>>"00"s in the EGR table or just turn off the light. I've had pretty good
luck
>>just turning off the EGR "test" instead of disabling EGR when somebody
does
>>an exhaust workover--comments ?
>>
>>I've got a 95 GM truck coming in this week--I've done a lot of the 7747
ECM
>>related ones, but this one's going to be new. Best way to disable ??
>>
>>Hope Shannon got his A/C working...
>>
>>Lyndon IPTECH
>>nwester at eidnet.org
>>Is it just me, or am I slowing down...
>>
>
>