da*ta lo*gger

[CSH-HQ]

The rs stuff came just as I left for Hospital, and Edelbrorck was just inna 
ad, so I have zero formal info on either.
Bruce


>Hiya Bruce,
>       I hope you're feeling well,,,,,,,have you checked them out.....can 
we modify the software??????cya
>-Carl Summers
>
>mailto:intech at writeme.com
>Click on the above link to respond privately.
>
>-----Original Message-----
>From:	CSH-HQ [SMTP:nacelp at jvlnet.com]
>Sent:	Thursday, July 22, 1999 8:25 PM
>To:	gmecm at efi332.eng.ohio-state.edu
>Subject:	Re: da*ta lo*gger
>
>Radio Shack, already had a several channel system, in their catalog, and was 
>reasonably priced.
>  Edelbrock is now adverttising one, but no price yet, ya might wait, and 
>see what these are
>Bruce
>
>>Hi Folks,
>>      I am presently working on a small, inexpensive  da*ta acq*uisition 
>>system.......When I am done I would like to have some of you de-bug it with 
>>me.......It's a simple 4 channel version that has inductive rpm and 3 other 
>>0-5's with a lcd display(pushbutton programmable 
>>descriptions/options,,,,very slow) but if hooked to a laptop will show 
>>scope form "real time" one channel or or all 4.......I want to have some 
>>built in options for the channels,including sample rates and below:
>>channel 1 =RPM
>>channel 2 =EGT....not k type but RTG....I found some good ones,solid state 
>> 2200f
>>channel 3 =0-5....with various sensors available....software included...ie 
>>pressures, temps,etc
>>channel 4 =AFR.....you can incorporate a horiba, ngk/ntk, and am working on 
>>even the LSM 11 as an inexpensive unit option software to use EGT(channel 
>>2) as a scew for getting at least a close reading of AFR for the guys that 
>>don't want or can't afford a Horiba or NGK type sensor.........
>>
>>The real time scope of AFR is extremely helpful when doing the AE 
>>transients.........
>>
>>I haven't decided how much memory it will have but am planning on it having 
>>an rpm or pushbutton start...
>>
>>Does this sound like something us DIY'rs can use???,,,,,even some of us 
>>tuning for profit??????
>>I don't know what the "beta's" will cost yet and am still a couple, three 
>>months away from having the first quantity batch of boards made,,,,but I 
>>would like to get some feedback as to who and how many of you can put this 
>>in different environments for me........Thanks for listening.
>>-Carl Summers
>>
>>mailto:intech at writeme.com
>>Click on the above link to respond privately.
>>
>
>