2.8 Fiero Turbo Project

[TK]

No problem!

Terry

-----Original Message-----
From: jgwynne at mrcday.com <jgwynne at mrcday.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Saturday, July 24, 1999 11:02 AM
Subject: Re: 2.8 Fiero Turbo Project


>
>
>
>| Not sure what you mean.
>
><delete>
>
>| >| ratty (a bit off for this 2.8L). I loaded it into the upper 128k of
the
>| 256K
>| >| for the 7730.
>| >
>| >The lower 16k x 8 of a 64k x 8 EPROM in a 730 is inaccessible. If you
>             ^^ should have been 32.. 32k x 8
>
>| >check the board routing, A15 of the larger EPROM is tied high. The EPROM
>| >can be either a 32k x 8 or 64k x 8, probably depending on what GM had
>| >in stock and the cheapest at the time.
>
>I misread your post... I thought you were writing of a
>27c512... which could be used as long as you put the code in the upper
>32k. pin 1 of the EPROM is tied high.
>
>john gwynne
>