Ignition Modules

[JTesta1966 at aol.com]

In a message dated 7/27/99 9:41:27 AM Eastern Daylight Time, 
frederic at xephic.dynip.com writes:

<< f one were to take the chip off the plastic carrier socket, and scan it
 with an eprom reader, the chips would be different from the FWD and the
 GN configuration.  This plastic carrier thing has a 68-pin connector on
 the bottom, and the chip/knock sensor on top.  My friend read this my
 simply unplugging the chip in its carrier, attaching a chip-clip, and
 reading it that w >>

Oh..oh..oh...thats the regular prom..ok,.those are just lookup tables and a 
smidgen of actual code. (I asssume thats the "car specific" code thats used. 
LIke $37AF-$3FFF or so..I see what you meant now. So this means as far as you 
can tell, are there differences between FWD and RWD modules?

Jim