It runs now! (pulls liike a beast too)

[Gary Derian]

Wouldn't that just move everything over?  If you have converted a mechanical
advance distributor to EFI you would have to move the vacuum advance plate
to adjust the phasing.

Gary Derian <gderian at oh.verio.com>

> > The problem?  Looks like it's related to 'rotor phasing'.  I don't
> > know squat about how the reluctor wheel/sensor in the distributor
> > works (seems like it needs to be adjusted), but having come this far
> > and learned so much, I have faith that we'll figure it out :^)
> > Whoever mentioned the rotor phasing deal yesterday on the list, thank
> > you -- I learned about it flipping through the Haltech book and there
>
> Even a blind hog stumbles on an acorn every now and again...
>
> To fix that, you pull the dizzy out enough that the rotor will turn a few
> degrees til it can catch the next tooth and then re-time. If it doesn't
> run at all you know you went the wrong way.  :)
>
> [EFI content is that you adjust the rotor/dizzy housing not the
> pickup...just like when there were points in there.]
>
> -greg
>