reset vector on a 68hc11

[David Cooley]

At 11:23 AM 6/25/99 -0400, you wrote:
>
>so then if the eprom is mapped in so the reset vector is at fffe-ffff
>I should subtract 7fff from A000 to get the position of the reset code in 
>the eprom ( 0x2000) right. What I'm trying to do is get a good asm listing 
>and reverse it to C ( I'm working backwards from gcc for 68hc11)

Yep!
=========================================================== 
David Cooley N5XMT Internet: N5XMT at bellsouth.net 
Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068 
We are Borg... Prepare to be assimilated! 
===========================================================