7730 addressing question

[Mike Pilkenton]

That's correct and I'm still looking for someone to help reprogram a chip
for me.  I also need to remove the EGR, VATS, AC stuff, and of course add
any performance I can.  Doug, can you do these things?  I have the bin file
available.

Mike
-----Original Message-----
From: rr <RRauscher at nni.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Tuesday, June 29, 1999 6:57 PM
Subject: Re: 7730 addressing question


>>Mike Pilkenton wrote:
>>>I'm curious on which V6 730 you are working on?  I have a 3.1L V6 (bin
ARPL)
>>>that I could use some help on.
>
>Mike, if I remember correctly, your using a '92 f-body engine/trans.
>
>Doug wrote:
>>I am working on the 88 Z24 2.8 V6.  Basically the same engine as yours.
>>The chip is ARDC.  I am mainly interested in changing the spark curves
>>because the engine needs to be rebuilt (over 188K) and I am not going back
>>stock nor do I want to run an EGR valve.  I don't run EGR now. I disabled
>>it a long time ago without an error code, but now I know how to disable it
>>form the chip.  Anyway I'm going to put flattop pistons in it to get the
>>compression up and I know it will want to ping some so I will need to
>>change the SA table.  I want to shoot for about 10.5:1 CR.
>
>
>A short while ago, I posted the .ecu file for what I had on the azty
>bin.
>I kinda hope you've taken a look at it. I've been playing with this one
>for
>a short while. I'm now getting into dissasembling sections of code to
>learn more.
>As for the main spark table, that one's a given...
>
>I wouldn't mind taking a look at your bin's, maybe they are similar
>enough where we can all work together and contribute.
>
>BobR.
>
>--
>
>