Parts sources ?

[Bruce Plecan]

-----Original Message-----
From: Padgett 0sirius <padgett at gdi.net>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Saturday, March 06, 1999 12:49 PM
Subject: Parts sources ?


>1) Anyone know where to buy the connectors used on the ALDL ?

About the only way now is buying a really cheap scanner, and hacking the end
off,
  for OBD11, they are available, from Packhard, and John @  (916) 685-1055
  might be able to help you
>
>2) Is there a list of which ECMs used which memories (original used two
>2732 (4kx8 in 24 pin DIP) & "Prom" was a 2708 (1kx8 also 24 pin DIP) - have
>also seen mention of "128" (16kx8 ?) & flash. Or just how many types/sizes
>of memory need to be accomodated. An only interested in GM at the moment.

Best listing I know is     http://www.cruzers.com/~ludis/
>
>3)Would also like to know how many diffeerent processors were used
>(original aka U1 and MP2 was identified as a "6802" on the "digital board
>schematic" & probasbly a Hitachi unit.) Know about the 68HC11F1. Are there
>others ?
>      A. Padgett Peterson, P.E. Cybernetic Psychophysicist
> Anti-Virus, Cryptographics, & Antique Radio Researcher
>http://www.freivald.org/~padgett/index.html
> mailto:padgett at gdi.net     PGP 5.5 Key on request
>