peak-n-holds

[Bruce Plecan]

-----Original Message-----
From: Mike Pitts <mpitts at emi.net>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Friday, March 19, 1999 7:32 PM
Subject: Re: peak-n-holds

Yep, sometimes called driver boards.  They have come and gone, Accel/Haltech
used to may still sell them.  Usually they are for batch fire applications,
so you'd need several.  Probablly some of the efi332 would work.
Bruce


>Thinking out loud:
>"You know what would be really cool?  A small device
>that plugs in between the injector plug and injector
>socket (at each injector), and contained a peak-n-hold
>driver.  There's already constant 12v at the injector, all
>one would need to do is wire in a suitable ground and
>use the incoming signal from the ECM as the trigger."
>Is this a silly idea?  If possible, it would make soldering
>new drivers inside the ECM unnecessary.
>-Mike