What IC in VSS buffer circuit GM.

[Terry/Carol Kelley]

I kept getting errors loading it. I passed it on the Pat and he could read
it. He said he would upload it to the incoming site.

Thanks for the bailout Pat!

Terry Kelley
1986 Olds Ciera GT 3800 Supercharged

-----Original Message-----
From: Dennis Bell <beltec at a.crl.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Monday, May 03, 1999 9:17 PM
Subject: Re: What IC in VSS buffer circuit GM.


>Pat,
>
>    Terry has volunteered to convert the file and post it. I've sent him
the source file (off list) and with any luck he will post it to the ftp
site. If he is unable to do this, I'll send the file to you and see if you
have any luck. The Orcad version is 7.20.17 but the file formats may be the
same as 7.11. There must be a utility that can convert
>files from various formats instead of printing and then scanning the
printout. Orcad can output to a dxf (Autocad) file. Should be some way to
convert to jpeg or gif.
>
>Thanks,
>
>Dennis
>
>
>Pat Ford wrote:
>
>> Previously, you (Dennis Bell) wrote:
>> > I believe the IC is a Delco only part. Haven't found a generic match to
it. Functionally it is a buffer between the optical switch in the speedo
head and the ecu and cruise control. I've traced out the schematic of the
buffer from an 89 Caprice and have it in Orcad format. I don't have access
to a scanner to provide it in a common file format.
>>
>> what version of orcad? I have a scanner and orcad(v7.11) here.
>>
>> --
>> Pat Ford                           email: pford at qnx.com
>> QNX Software Systems, Ltd.           WWW: http://www.qnx.com
>> (613) 591-0931      (voice)         mail: 175 Terrence Matthews
>> (613) 591-3579      (fax)                 Kanata, Ontario, Canada K2M 1W8
>
>
>