What tables Do you edit

[Ken Kelly]

Terry,
	Thanks, Looks like I have a little research to do. I
haven't found the AE tables in this PCM.
		Ken

Terry/Carol Kelley wrote:
> 
> AE is different than PE. AE is like an accelerator pump. PE fuel to decrease
> the AFR for WOT or near WOT conditions.
> 
> AE is used when the TPS is suddenly increased to to keep the AFR from going
> lean.
> 
> Terry
> 
> -----Original Message-----
> From: Ken Kelly <kenkelly at lucent.com>
> To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
> Date: Monday, May 03, 1999 8:48 AM
> Subject: Re: What tables Do you edit
> 
> >Bruce,
> > I assume that Acceleration enrichment is the same as the
> >Power Enrichment that I implemented. Do you know something
> >different? I have PE vs Temp and PE vs RPM tables in the
> >editor.
> >
> > Ken
> >
> >Bruce Plecan wrote:
> >>
> >> ----- Original Message -----
> >> From: Ken Kelly <kenkelly at lucent.com>
> >> To: <gmecm at efi332.eng.ohio-state.edu>
> >> Sent: Sunday, May 02, 1999 9:58 PM
> >> Subject: Re: What tables Do you edit
> >>
> >> > > There are always a few that like to do everything, but I'd be happy
> with
> >> the
> >> > > ones youe have currently listed.
> >> > > With may be. AE to CTS correction
> >> > > MAP/MAF scalers for switching MAF/MAPS.  Ranges/freguencies for
> >> either/and.
> >> > > Switch setttings for VSS optional types if there.
> >> > > Bruce
> >>
> >> > Bruce,
> >> > I have found the MAF vs Frequency table. It has 76 entries, and the
> ntries
> >> are
> >> > integer, not byte. I am writing some new code for this one. What is AE
> to
> >> CTS
> >> > correction? I don't recognize the term.
> >>
> >> Accleration enrichment referenced to coolant temperature
> >> Bruce
> >> >
> >> > Ken
> >> > > >
> >> > > > Ken
> >> > > >
> >> >
> >
> >