Misc Electronics

[Shannen Durphey]

Frederic Breitwieser wrote:
> 
> > How do ya prep the parts before coatin em with the techline stuff?
> 
> Sandblast with fine sand, clean with compressed air, coat.  You can also
> use a wire brush.  Just make sure you don't scrape, blast, grind, or
> damage the side skirts... this is just for the piston tops and maybe
> down to the first ring land if you feel industrious.
> 
If you go this route, techline coatings, I would not apply DFL to the
valve stems in the way the instructions direct.  I am replacing 16
brand new valves, which were ruined before they were ever installed,
due to my misguided efforts.  If you want more info, please reply off
list.
Shannen