Lt1 Ignition Table's

[Roger Heflin]

On Mon, 17 May 1999, Ken Kelly wrote:

> Rodger,
> 	Don't quite understand your question. The RPM step is 200 RPM in the lower
> table and 500 RPM in the upper table. The Kpa step is 5 in both tables and the
> actual conversion of the Byte to Advance Degrees is the same for both Tables.
> 
> 		Ken
>

That was what I ment.  Mine in most of the tables seems to go at
400rpm low and 500 rpm above 4000.  Though I don't yet know about the
spark table.   The conversion being the same would be consistant with
the way most of the tables I have work also.

			Roger