Lt1 Ignition Table's

[Roger Heflin]

On Mon, 17 May 1999, Ken Kelly wrote:

> Rodger,
> 	My last statement was incorrect. The RPM is actually in three tables with three
> step sizes in the 94-95 PCM. It is 200 RPM steps from 400 to 2400 RPM, 400 RPM
> steps from 2800 to 4000 Rpm, then 500 RPM steps. The first two table are
> consecutive in memory, and I treated them as one in my software.
> 
> 		Ken
>

So it uses the rpm/12.5 for 400-2400 and rpm/25 from 2400 to 4000 and
rpm/31.25 for 4000 up.   I wondered where it was using the rpm/12.5 I
had not yet found any code using that.

			Roger