Mo Assembly

[Bruce Plecan]

Clear flood modes vary by application,  TPS can be >50%/>80%.
Can be injectors off, or AFR  20:1
Grumpy

 
| > Within the new subroutine, compare the TPS position with a 50% 
| > value, and set a bit based on the results. ie full throttle at key-on 
| > time = "hi perf mode" bit set.  You need a spare RAM location to do 
| > this, or a spare BIT within a ram byte location.
| 
| I think that many gm computers check the TPS position at key-on and will
| go into flood-clear mode (no-fuel) if its at WOT.
| -Eric