Mo Assembly

[eclark at hoser.com]

On Fri, 28 May 1999, Dave Z wrote:

> Within the new subroutine, compare the TPS position with a 50% 
> value, and set a bit based on the results. ie full throttle at key-on 
> time = "hi perf mode" bit set.  You need a spare RAM location to do 
> this, or a spare BIT within a ram byte location.

I think that many gm computers check the TPS position at key-on and will
go into flood-clear mode (no-fuel) if its at WOT.

-Eric