intergrator and BLM

[Mike Rolica]

Like I said to bruce, I don't like clutter.  Where is the code stored on the
730? Physically and address? -address? Is it like the 165 and very similar
to the 68hc11f1 Motorola microcontroller?
Mike Rolica
EXT. 260
 :-)


	-----Original Message-----
	From:	David Cooley [SMTP:n5xmt at bellsouth.net]
	Sent:	Wednesday, November 03, 1999 1:11 PM
	To:	gmecm at efi332.eng.ohio-state.edu
	Subject:	Re: intergrator and BLM

	At 12:56 PM 11/3/1999 -0500, you wrote:
	>OK, staying on this thread, How large is the BLM on a 90 730 on a
f-body?
	>Can it be enlarged from lets say 16 to 32 as to give a finer
resolution?
	>Does this make sense?, Also, can some of the fuel map tables
PE/tables be
	>enlarged to a finer resolution at cruise rpm, in my instance
1500-2600?  I
	>know that the prom/memcal is pretty full but can some of this stuff
be
	>scraped because it is not used? Ie shift light stuff, ccp, air
injection?
	>Too free up space?


	It could probably be done, but you just can't scrap the tables...
The code 
	will be looking for data in those locations.  You'd need to totally 
	re-write the code.
	Why not just go to a newer PCM with more PROM space and customize
from there?

	===========================================================
	David Cooley N5XMT Internet: N5XMT at bellsouth.net
	Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
	We are Borg... Prepare to be assimilated!
	===========================================================