intergrator and BLM

[Squash]

Remember, everything is offset by 8000 in that
disassembly.

Squash

--- "Dr.Acacio" <aortiz at w3ti.com.br> wrote:
> Thank you for the reply but I could not found with
> the dissasembly where are
> the address of the FAN parameters....It shows the
> content of the parameter
> but not the hexa address...!!!!
> 
> I will try  hex 4BA  changing from C1 to BF  and 
> 4BB  from C5  to C2
> ........
>  C1 = 104 C  ????       C5 = 107 C   ????
> 
> -----Mensagem Original-----
> De: Mike Rolica <mrolica at meridian-mag.com>
> Para: <gmecm at efi332.eng.ohio-state.edu>
> Enviada em: Quinta-feira, 4 de Novembro de 1999
> 16:55
> Assunto: RE: intergrator and BLM
> 
> 
> >
>
http://www.geocities.com/MotorCity/Shop/9938/hacks.html
> >
>
<http://www.geocities.com/MotorCity/Shop/9938/hacks.html>
> > this is the ecmguy's website, lotsa good info,
> plus a vette hack of the
> 727
> > (underhood version of the 730 ecm) and lotsa stuff
> you should read though
> if
> > you are a newbie. Is in adobe acrobate format
> > Mike Rolica
> > EXT. 260
> >  :-)
> >
> >
> > -----Original Message-----
> > From: Dr.Acacio [SMTP:aortiz at w3ti.com.br]
> > Sent: Thursday, November 04, 1999 1:48 PM
> > To: gmecm at efi332.eng.ohio-state.edu
> > Subject: Re: intergrator and BLM
> >
> > Where I can find the anht dissasembly file????
> > Is there any information about where is the Fan
> temp starting
> > address????
> > Could be used this information to discover where
> is in the BDZL file
> > the fan
> > start temp address?????
> >
> > -----Mensagem Original-----
> > De: CSH-HQ <nacelp at jvlnet.com>
> > Para: <gmecm at efi332.eng.ohio-state.edu>
> > Enviada em: Quarta-feira, 3 de Novembro de 1999
> 18:08
> > Assunto: RE: intergrator and BLM
> >
> >
> > > Careful, on some of the f-body/vette some of the
> tables are the
> > same but
> > > some of the switches are different (rad fan
> comes to mind).
> > > Grumpy
> > >
> > >
> > > Code and tables are on the eprom that is on your
> > > >memcal unit.  the tables start at 0 and the
> code
> > > >starts at 3000H (in the eprom).  If you are
> serious
> > > >about modifying your code, download the anht
> > > >dissasembly from ecmguy.  all of the tables are
> in the
> > > >exact same locations as your aujp(?).  There
> are also
> > > >descriptions of most tables.
> > > >
> > > >Squash
> > > >
> > > >--- Mike Rolica <mrolica at meridian-mag.com>
> wrote:
> > > >> Like I said to bruce, I don't like clutter. 
> Where
> > > >> is the code stored on the
> > > >> 730? Physically and address? -address? Is it
> like
> > > >> the 165 and very similar
> > > >> to the 68hc11f1 Motorola microcontroller?
> > > >> Mike Rolica
> > > >> EXT. 260
> > > >>  :-)
> > > >>
> > > >>
> > > >> -----Original Message-----
> > > >> From: David Cooley [SMTP:n5xmt at bellsouth.net]
> > > >> Sent: Wednesday, November 03, 1999 1:11 PM
> > > >> To: gmecm at efi332.eng.ohio-state.edu
> > > >> Subject: Re: intergrator and BLM
> > > >>
> > > >> At 12:56 PM 11/3/1999 -0500, you wrote:
> > > >> >OK, staying on this thread, How large is the
> BLM
> > > >> on a 90 730 on a
> > > >> f-body?
> > > >> >Can it be enlarged from lets say 16 to 32 as
> to
> > > >> give a finer
> > > >> resolution?
> > > >> >Does this make sense?, Also, can some of the
> fuel
> > > >> map tables
> > > >> PE/tables be
> > > >> >enlarged to a finer resolution at cruise
> rpm, in
> > > >> my instance
> > > >> 1500-2600?  I
> > > >> >know that the prom/memcal is pretty full but
> can
> > > >> some of this stuff
> > > >> be
> > > >> >scraped because it is not used? Ie shift
> light
> > > >> stuff, ccp, air
> > > >> injection?
> > > >> >Too free up space?
> > > >>
> > > >>
> > > >> It could probably be done, but you just can't
> scrap
> > > >> the tables...
> > > >> The code
> > > >> will be looking for data in those locations. 
> You'd
> > > >> need to totally
> > > >> re-write the code.
> > > >> Why not just go to a newer PCM with more PROM
> space
> > > >> and customize
> > > >> from there?
> > > >>
> > > >>
> > > >>
> > >
>
>===========================================================
> > > >> David Cooley N5XMT Internet:
> N5XMT at bellsouth.net
> > > >> Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R.
> Member
> > > >> #7068
> > > >> We are Borg... Prepare to be assimilated!
> > > >>
> > > >>
> > >
>
>===========================================================
> > > >>
> > > >
> > > >
> > > >=====
> > > >
> > >
> >__________________________________________________
> > > >Do You Yahoo!?
> > > >Bid and sell for free at
> http://auctions.yahoo.com
> > > >
> > >
> 
> 
> 
> 


=====

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com