eproms

[Mike Rolica]

What about a flash type eprom in a 165/730???   on a 165, where is the
memcal??
Mike Rolica
EXT. 260
 :-)


	-----Original Message-----
	From:	Squash [SMTP:realsquash at yahoo.com]
	Sent:	Wednesday, November 10, 1999 2:22 PM
	To:	gmecm at efi332.eng.ohio-state.edu
	Subject:	Re: eproms

	You can substitute the eprom with a battery-backed
	static ram or an eeprom (you might have to pull up 2
	pins and "jumper" them).  I personally like the eeprom
	idea, but i think that the sram will program faster.

	Squash

	--- Mike Rolica <mrolica at meridian-mag.com> wrote:
	> OK, so I have a 87 165 ecm with a 27c128 eprom.  Now
	> a couple of questions.
	> Can I huse a 27c512 eprom cause it has extra room? 
	> What would I have to do
	> to use this one and/ or why can't I?  Second I have
	> asked this question
	> before... but can I use a eeprom instead (so I don't
	> have to erase it uv all
	> the time) ?
	> Lastly  where would I find some blank eproms ?
	> Mike Rolica
	> EXT. 260
	>  :-)
	> 
	> 


	=====

	__________________________________________________
	Do You Yahoo!?
	Bid and sell for free at http://auctions.yahoo.com