caddy-olds and the buick v6

[Don.F.Broadus at ucm.com]

I'm not worthy O' great one

> -----Original Message-----
> From:	nacelp at jvlnet.com [SMTP:nacelp at jvlnet.com]
> Sent:	Wednesday, November 10, 1999 5:27 PM
> To:	gmecm at efi332.eng.ohio-state.edu; gmecm at efi332.eng.ohio-state.edu
> Subject:	RE: caddy-olds and the buick v6
> 
> Twice in two days, I'm slepping, great call.....
> Grumpy
> 
> 
> At 03:39 PM 11/10/99 -0600, gmecm at efi332.eng.ohio-state.edu wrote:
> >Since you need 4 coils for V8 DIS I would try 2   4 cly. coil paks. You
> >should be able to use the hall effect sensors, coil pak
> >modules  and wires. The ECM should drive both  coil pak modules with out
> any
> >trouble. Look for 2.0 L  2.5 L engines for the coil paks and V8 engines
> for
> >the fuel rails or fab up 2  4 cly. fuel rails with a V8 fuel reg.    
> >
> >
> >
> >> -----Original Message-----
> >> From:	mswayze at truswood.com [SMTP:mswayze at truswood.com]
> >> Sent:	Wednesday, November 10, 1999 2:38 PM
> >> To:	gmecm at efi332.eng.ohio-state.edu
> >> Subject:	Re: caddy-olds and the buick v6
> >> 
> >> I had never even seen a dis until my brothers buick wouldn't run right.
> >> about the only thing I found on the web was a trainer of sorts.
> >> http://www.atechtraining.com/try.htm
> >> 
> >> wish I had more hands on on this stuff.
> >> thanks
> >> Mike
> >> At 01:54 PM 11/10/1999 -0600, you wrote:
> >> >If you find a gm DIS module for a v-8 let me know
> >> >electromotive makes one $$$
> >> >Grumpy
> >> >
> >> >
> >> >At 12:08 PM 11/10/99 -0500, gmecm at efi332.eng.ohio-state.edu wrote:
> >> >>Not knowing exactly what components are used, I am wondering if the
> v6
> >> >>distributorless ignition, fuelinjection components can be adapted to
> v8
> >> >>use, and if so what the part numbers are.
> >> >>--Mike
> >> >>
> >> >>
> >> >
> >> >
> >