Bins for 89 305 TPI?

[Mark Romans]

Replace the relay's.  There's a GM bulletin on this.  Terry, Kev just replaced the relay's on his new ta and it fixed, this after he looked at them under a microscope and was "SURE" they were ok.
Mark
    -----Original Message-----
    From: TK <terryk at foothill.net>
    To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
    Date: Sunday, November 14, 1999 8:13 PM
    Subject: Re: Bins for 89 305 TPI?
    
    
    Isn't the max maf airflow table used for throwing a Malf 33 (MAF too high)? It's RPM VS AIRFLOW.
    
    Peter? Bruce?
        I'm working with MAF still, still having this weird problem of intermittent Code33(MAFHI). One of these days, I'll figure it out. Must be loose wire somewhere, maybe in the sensor, maybe something else loose or spikey. Maybe throw some caps around & see what happens. Might like one of those heated O2 sensors for the TA. Probably speed closed-loop approach with headers.
         
        Comments appreciated, particularly with respect to happy hackers with 305TPI applications.
         
        Thanks,
        -Craig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/19991115/4a690b14/attachment.html>