Auto learn code

[Scot Sealander]

rr wrote:
 
> This is great, are you using a wide-band O2, or are you just doing
> cruise areas?

I have turned off EGR, PE, and DFCO.  Put boost cut off at 108 kPa.
Force it to run in closed loop up to 100 kPa.  Don't run it long
at the higher loads.  Must be a real pain to follow down the
4 lane, always speeding up, slowing down to trying to cover as many
learn cells as possible.  ;-)  It is just the standard O2 sensor.

 
> A v-6, '92 f-body has the MAT in the aircleaner housing which is
> located opposite the battery.

I think it is really better out there.  Then add something for
in manifold heating.  May have to figure out how to get it in the
output air stream of the intercooler.  Will have to screw it in
somewhere, as boost will pop it out of the plastic snap fit that
they (F-body and other FWDs) use for the air cleaner mounting.

Yes Bruce, it is the 1227727 ECM.  It has been modified to have
an extra 2k of RAM.

Thanks, Scot