Mallory Fuel Regulator

[rr]

John, Bruce, thanks for the info. This is the one I'll get to install
with the TBI. I thought about the gm reg for higher pressure, but
they are not as easy to adjust. Besides, this one can take to a
port injected setup!

BobR.

jsg at donet.com wrote:

> | Is anyone out there familiar with the Mallory 3-port , return style
> | regulator? (#4309).
> |
> | My question is: Can it be used in an efi setup where it regulates
> | the pressure upstream? Such as a replacement for a TBI
> | regulator. (hope this makes sense) It would be setup as
> | a two port reg. Inlet is from the injectors (to be regulated),
> | and the outlet is back (return line), to the tank.
>
> I have one, and yes it can.
>
> I'm currently using it in my injector test bench. As I recall, feed
> the high pressure (injector side) into the bottom, return line into
> the side (plug other hole), and connect the vacuum reference (if
> appropriate).
>
> john gwynne