LT1 Tables

[Roger Heflin]

Data tables are 0-1000, the prom is empty from 1000-2000, and the
code starts at 2000 on a 93 LT1.



On Sun, 28 Nov 1999, Bruce Plecan wrote:

> Again, this is a follow up to programming 101, so read all of that before
> even attempting to use this information.  Also, tuning text, and tuning doc.
> 
> MY93
> BAFL type bin  (if in doubt run something like compbin {from the tunercat
> site}, changes between about 0000 and 1000 don't matter).  I'm not for sure
> about where data, and code breaks.
> 
> Rad fan on and offs  04BA, 04BB, 04BC, and 04BD
>    If you look at the h to d, and do the math they are obvious
>    You must keep 6d spread in fan 1, and 5 in fan 2,  I think
> VATS  Disable      03C6     D3 to 53
> Spark  16 (25-100 K/Pa) by 17 (first line 0 rpm then by 200 rpm to 2400 rpm)
>    then 400 rpm for 2400-4000     00A4   to   01B3
> Extended Spark  16 by 8  4000  to 7500 rpm in 500 rpm steps   01B7   to 0236
> Fuel  17 (20-100 K/Pa)  by 17 400 to 2000 rpm in 100 rpm steps  0B24 to 0C44
> Fuel Extended 17x13 2000 to 7000 rpm  500 rpm steps   0C48 to 0D24
> 
> Now, this is as far as I know correct, and you get what ya pay for <g>....
> Yes, you gotta do some work...
> Grumpy
> 
> 
>