LT1 Tables

[Bruce Plecan]

Again, this is a follow up to programming 101, so read all of that before
even attempting to use this information.  Also, tuning text, and tuning doc.

MY93
BAFL type bin  (if in doubt run something like compbin {from the tunercat
site}, changes between about 0000 and 1000 don't matter).  I'm not for sure
about where data, and code breaks.

Rad fan on and offs  04BA, 04BB, 04BC, and 04BD
   If you look at the h to d, and do the math they are obvious
   You must keep 6d spread in fan 1, and 5 in fan 2,  I think
VATS  Disable      03C6     D3 to 53
Spark  16 (25-100 K/Pa) by 17 (first line 0 rpm then by 200 rpm to 2400 rpm)
   then 400 rpm for 2400-4000     00A4   to   01B3
Extended Spark  16 by 8  4000  to 7500 rpm in 500 rpm steps   01B7   to 0236
Fuel  17 (20-100 K/Pa)  by 17 400 to 2000 rpm in 100 rpm steps  0B24 to 0C44
Fuel Extended 17x13 2000 to 7000 rpm  500 rpm steps   0C48 to 0D24

Now, this is as far as I know correct, and you get what ya pay for <g>....
Yes, you gotta do some work...
Grumpy