GMECM Digest V1 #295

[Frederic Breitwieser]

> Couldn't you just build a simple current booster
> stage, driven by the Injector output from the ECM?

Yes.  I did this with a Haltach system to provide drivers for additional
stages of injectors.

> Seems like a 2N3055 or TIP22 emitter follower would do
> the job nicely. Cost around $3.00 to build, plus no

I would recommend using MOSFET devices, only because they switch faster
thus at higher RPMs where the pulsewidth is smaller you can get a nice
square wave from the MOSFET rather than a slight ramp-up.  Hey, every
little bit helps :)

-- 

Frederic Breitwieser
Xephic Technology
769 Sylvan Ave #9
Bridgeport CT 06606

Tele: (203) 372-2707
 Fax: (603) 372-1147
Web: http://xephic.dynip.com/