new to list
mable smith
wooster9 at juno.com
Mon Oct 18 16:14:51 GMT 1999
On Sun, 17 Oct 1999 12:41:00 -0500 nacelp at jvlnet.com (CSH-HQ) writes:
I have several chips to compare once I get started. About 10 JET chips
(they did not require a return like superchips) 2 superchips and a stage
2 off the shelf Hypertech. I will be on the lookout for a diacom and a
lap top. I just purchase an eprom burner on ebay. I start looking and
comparing chips once I get it. I will just need to learn from the list
what I am looking at.
Thanks
Ronnie
>What started me off on chips was about the same deal. Two free
>reprograms.
>They charged me one of free reprograms, since they sent me a manual
>tranny
>chip for my autp application, them saying I must have made a mistake,
>ya
>right, I forgot what tranny my car has in it....
> Anyway, I just wish you had a stock car with the same ecm to get
>your
>feet a little wet with first. You'll be playing a great deal with
>things
>depending on how far off they are in their calibration, but once you
>compare a stock calibration to their then you should have a indication
>of
>what is who.
> After playing with many scanners, i'll repeat, try to find a used
>diacom+, and an old laptop. Being able to record, and replay is a
>joy.
>Grumpy
>
>
>>Maybe I was misinformed during the buying part of the chip. But they
>did
>>tell me that I could make as many changes as I wanted at no charge.
>The
>>last change was a major one though, Vortech Supercharger, which I
>have
>>since removed, because my compression is too high to utilize it
>properly.
>>I once changed to a 306 Comp Cam and had to take it out because they
>>could not get it not to run so rich. I was also sending them the O2
>>sensor readings from my autoxray. Now my autoxray is not working
>right.
>>Anyway I did'nt mention their name to give them bad press. I went
>through
>>this same thing with JET and thought I could start doing more mods by
>>using another company. Now I figure it is time to learn to do it
>myself,
>>if I can, with the help from this list.
>>The car idles a little rich and is blowing black smoke at WOT, as
>>observed at the drag strip. I need to get another scan tool of some
>sort
>>to start reading the data again.
>>The chip is a BDBK
>>
>>Thanks
>>Ronnie
>>___________________________________________________________________
>>Get the Internet just the way you want it.
>>Free software, free e-mail, and free Internet access for a month!
>>Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
>>
>
___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
More information about the Gmecm
mailing list