new to list

[CSH-HQ]

OK, then if you haven't been there, for the next step, I suggest is the 
ecmguy's URL, and get a hack for the ecm your using and see, if it lines up 
with that.
  Be prepared for yours not to be a perfect match thou. 
  Or has someone run that bin in a bin comparision program to see if it's 
the same already?.
Grumpy

>
>On Sun, 17 Oct 1999 12:41:00 -0500 nacelp at jvlnet.com (CSH-HQ) writes:
>I have several chips to compare once I get started. About 10 JET chips
>(they did not require a return like superchips) 2 superchips and a stage
>2 off the shelf Hypertech. I will be on the lookout for a diacom and a
>lap top. I just purchase an eprom burner on ebay. I start looking and
>comparing chips once I get it. I will just need to learn from the list
>what I am looking at.
>
>Thanks
>Ronnie
>
>>What started me off on chips was about the same deal.  Two free 
>>reprograms.  
>>They charged me one of free reprograms, since they sent me a manual 
>>tranny 
>>chip for my autp application, them saying I must have made a mistake, 
>>ya 
>>right, I forgot what tranny my car has in it....
>>   Anyway, I just wish you had a stock car with the same ecm to get 
>>your 
>>feet a little wet with first.  You'll be playing a great deal with 
>>things 
>>depending  on how far off they are in their calibration, but once you 
>>compare a stock calibration to their then you should have a indication 
>>of 
>>what is who.
>>   After playing with many scanners, i'll repeat, try to find a used 
>>diacom+, and an old laptop.  Being able to record, and replay is a 
>>joy.
>>Grumpy
>>
>>
>>>Maybe I was misinformed during the buying part of the chip. But they 
>>did
>>>tell me that I could make as many changes as I wanted at no charge. 
>>The
>>>last change was a major one though, Vortech Supercharger, which I 
>>have
>>>since removed, because my compression is too high to utilize it 
>>properly.
>>>I once changed to a 306 Comp Cam and had to take it out because they
>>>could not get it not to run so rich. I was also sending them the O2
>>>sensor readings from my autoxray. Now my autoxray is not working 
>>right.
>>>Anyway I did'nt mention their name to give them bad press. I went 
>>through
>>>this same thing with JET and thought I could start doing more mods by
>>>using another company. Now I figure it is time to learn to do it 
>>myself,
>>>if I can, with the help from this list. 
>>>The car idles a little rich and is blowing black smoke at WOT, as
>>>observed at the drag strip. I need to get another scan tool of some 
>>sort
>>>to start reading the data again. 
>>>The chip is a BDBK
>>>
>>>Thanks
>>>Ronnie
>>>___________________________________________________________________
>>>Get the Internet just the way you want it.
>>>Free software, free e-mail, and free Internet access for a month!
>>>Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
>>>
>>
>
>___________________________________________________________________
>Get the Internet just the way you want it.
>Free software, free e-mail, and free Internet access for a month!
>Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
>