LT1 LOW FUEL PRESSURE
David Cooley
n5xmt at bellsouth.net
Tue Oct 19 18:00:14 GMT 1999
At 01:34 PM 10/19/1999 -0400, you wrote:
>Regarding the LT1 low pressure... the statement low pressure is an
>understatement!!! Roughly 200 kilopascals (kpa) is equal to 30 pounds per
>sqaure inch (psi). If you only have 1-2 kpa of pressure that's a fraction
>of a psi. L98 engines (I believe) typically run at about 32 psi with the
>factory regulator but adjustables can boost that up. The tank pump should
>be more than capable. Something sounds fishy here. In other words, is the
>gauge known good?
I'd either suspect a leak at the pump or a bad regulator...
The original poster had said the guage showed the right pressures on an LT1.
===========================================================
David Cooley N5XMT Internet: N5XMT at bellsouth.net
Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================
More information about the Gmecm
mailing list