LT1 LOW FUEL PRESSURE

[Squash]

What is the pressure w/o doing anything else?  Measure
it with the pump running, on the supply side.  Are you
using a 5/16" supply and a 1/4" return line?  The
return sounds a bit small to me.  

Squash

--- Luke Joseph <LJoseph at RFMD.com> wrote:
> I tested the regulator by pinching the return line
> and watching the fuel
> pressure gauge while pump was on ( I could hear it
> running).  I could see no
> increase in pressure.  I have tried both the
> 5/16(original vent) and
> 1/4(original return) as the current return.  With
> the same results.  Sorry
> about such basic questions but I've got to get to
> the point were she is
> running before I can start playing with scanning and
> programming.  Thanks,
> Luke

=====

__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com