'7747 bin wanted

[EFISYSTEMS at aol.com]

Hi Marc,
      I'd be glad to help too....Where are you located???? prolly better to 
contact me offlist at    InTech at writeme.com    ttyl
-Carl Summers


In a message dated 10/24/99 8:52:35 PM Pacific Daylight Time, 
mpiccioni at attcanada.net writes:

<< Subj:     '7747 bin wanted
 Date:  10/24/99 8:52:35 PM Pacific Daylight Time
 From:  mpiccioni at attcanada.net (Marc Piccioni)
 Sender:    owner-gmecm at esl.eng.ohio-state.edu
 Reply-to:  gmecm at efi332.eng.ohio-state.edu
 To:    gmecm at efi332.eng.ohio-state.edu ('gmecm at efi332.eng.ohio-state.edu')
 
 Hi group,
 
 After monitoring and learning a great deal from this group, I've finally 
 jumped in with both feet and am 3/4's down swapping a 89' 350 TBI motor 
 into my '83 Malibu.
 
 The engine is light duty variant out of a 1500 series PU, the only complete 
 wiring harness that I was able to get used locally is out of a '88 HD 3/4 
 ton G van.  The G van harness is set up with a kickdown relay for a TH 400, 
 and doesn't have provision for EGR.
 
 The Malibu has a L/U TH 350 in it and a 2.91 rear gear.
 
 Any suggestion for a bin ? I'd be willing to pay for someone's time to mod 
 and burn an EPROM (EPROM burner's on the Xmas list......).
 
 The engine is bolted in and needs about another 6 hours to finish wiring 
 the ECM and misc. assembly to complete. I have a LD 350 bin and net res. to 
 get it fire up initially.
 
 /Marc
  >>