305 idle with this cam and chip

[Todorovic]

Just curious how would a .030 over 305 idle with this cam and would a
aftermarket computer chip work with it?  What about stock chip?  I am
assuming Edelbrock Performer Intake and Holley 670 cfm TBI.  Here is the
cam:

215/224 duration at .050; .478/.480 lift (not sure if 1.6 or 1.5 rockers)
and 112/108 LC. It is a Lunati Grind.  Motor would be a close to 10:1 CR 305
with headers and 3" exhaust.  DDDyno says good power, but I don't believe it
that much. Thanks.


Igor Todorovic, U of C
1981 Delta 88, 455 4bbl
1988 Pontiac Trans AM, L03, T5
WebSite:

http://members.home.net/igor455/olds.htm