MAF Signal Generator Misc MAF ????s
eclark at hoser.com
eclark at hoser.com
Sat Oct 30 01:09:05 GMT 1999
I can try diacom plus, when I pick up the '94 Trans Am I'm buying
tomorrow. Diacom is recommended for 94 and 95 on the fourth-gen list, so
I think it does work with it.
- Eric
On Fri, 29 Oct 1999, Jason Haines wrote:
> At 11:03 AM 10/29/99 -0500, you wrote:
> >Has anyone built a 555 pulse generator for like a 88 f-body/GN?.
> >If so may I have a copy of the schematic, or values used.
> >
> >On the later F-Bodies they used MAF+MAP. Are there any early enough to use
> >diacom on?.
>
> 1994 was the first year for MAF and MAP. I don't think Diacom will work
> with these but I have Tech 2 snapshots along with Autotap and Ease
> snapshots of 1994 and newer vehicles with both MAF and MAP. E-mail me
> directly and I can see what I can send you.
>
> >If so has anyone written down the MAF v vs MAP value(v), so that a relation
> >ship from the two might be drawn?.
>
> Keep in mind that MAF versus MAP does not stay constant - it varies with
> engine size, throttle body and other air intake restriction, intake
> manifold design, camshaft, RPM etc...
>
>
> Jason
>
More information about the Gmecm
mailing list