Interesting '89 Calibrator...

[Ludis Langens]

flying.chimp at juno.com wrote:
> 
> This is a little late but, I have a 89 Corvette with ARAR........no
> resistor, no cut leads.

> >>the 16 pin chip of the two small chips has had the
> >#2 and
> >>#15 leads cut. There is also a 10k resistor soldered across the #2
> >and #3
> >>contacts in the calibrator socket of the same chip.

It would be interesting to see what the part numbers are on 16 (and 14)
pin chips in a cal with and a cal without the resistor&cuts.  They can
be hard to see (under the hybrid circuit), but can be read if light is
shined through in just the right angle.

If someone posts the numbers (and the MEMCAL's BCC), I'll add them to
  http://www.cruzers.com/~ludis/calxref.html

-- 
Ludis Langens                               ludis (at) cruzers (dot) com
Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/