Interesting '89 Calibrator...

[Mike Frels]

At 03:58 AM 9/19/1999 -0800, you wrote:
>flying.chimp at juno.com wrote:
> >
> > This is a little late but, I have a 89 Corvette with ARAR........no
> > resistor, no cut leads.
>
> > >>the 16 pin chip of the two small chips has had the
> > >#2 and
> > >>#15 leads cut. There is also a 10k resistor soldered across the #2
> > >and #3
> > >>contacts in the calibrator socket of the same chip.
>
>It would be interesting to see what the part numbers are on 16 (and 14)
>pin chips in a cal with and a cal without the resistor&cuts.  They can
>be hard to see (under the hybrid circuit), but can be read if light is
>shined through in just the right angle.
>
>If someone posts the numbers (and the MEMCAL's BCC), I'll add them to
>   http://www.cruzers.com/~ludis/calxref.html

I'm the one who originally started this thread. I found this arrangement on 
an APYM 3493. Here are the numbers from the two other chips.

14 PIN: 16072665
16 PIN: 16072667

Mike Frels